Friday, November 14, 2008

Canon SX110 PowerShot camera in depth review

The Canon Powershot SX 110 IS  camera($212)  is a relatively compact super zoom, with a 10X range.  In this full review I'll discuss both specs, real world usability, and image quality with pictures I took with my production SX110 that I purchased myself. 

The Specs

The camera has a 9 megapixel sensor, with optical image stabilization.  9 megapixels is a lot and pretty much more than anybody really needs, given that most computer LCDs can't even show a full 2 megapixel image. There' s no reason to hold out for a larger MP camera. 

The camera weighs 245 grams without batteries, and with 2AAs, the weight comes up to about 300g.  It does not have an optical viewfinder, but makes up for it with a large 3 inch LCD with 230k pixels that is bright, clear, and pretty color accurate.  The camera measures 4.35 x 2.77 x 1.76 in, which is a bit bulky for a pocket camera, but it will fit in baggy pants pockets in pinch.  Otherwise, the camera ergonomics are quite good; it fits very comfortably in your hand, and the buttons are well placed. 

The camera is powered by AAs; Canon ships it with two throw-aways, which according to CIPA standards should net you 220 shots. CIPA for rechargeable NIMH batteries is officially 450 shots. I bought Sanyo Eneloop pre-charged (aka slow-self discharge) NIMH batteries (2 kmAh), which out of the box allowed me to take 370 photos and a 1 minute movie. Supposedly the eneloop batteries get better after a couple uses, so 450 shots per charge isn't completely crazy, but I didn't use the flash almost at all, which I'm sure increased my battery life a bit. Note that you can get higher mAh batteries (up to 2.8k mAh), which in theory would allow more pictures per charge, but regular NIMH battery have a high self-discharge rate (20% in the first day, and ~1 percent each following day) so the low-self discharge batteries (which top out at 2k mAh) are probably going to get you the most shots on average unless you plan to take more than 200 shots a day (hey, why not!).

Images can be stored on a SD/SDHC Memory Card, MultiMediaCard, MMC Plus Card, or HC MMC Plus Card. Canon plays a little 'joke' on you and provides a 32MB card with the camera. Might as well find a needy landfill for that one, and get something in the multi-gig range (4GB is a nice size, and lets you record up to 32 minute 640x480 movies).


The flash flips out from the top of the SX110, which is done manually before you want to use the flash. This is nice in that it prevents you from firing the flash by mistake, but does mean more hassle when you do want to use the flash. Even worse, it takes a really long time to charge the flash - I'd estimate about 5 seconds. Apparently this is the downside to using NIMH batteries, rather than a proprietary LiON battery.  Frankly, I don't like the unnatural colors that flashes generally give to photos (this is true of most cameras, not just this one), so I don't care that much.

The interface for the SX 110 is really well thought out. It uses the same standard Canon menu system that I've seen on Canon cameras since the start of this decade. When in auto mode, the menu system gives you very little control, but flip the mode dial to Program, and you can set white balance, metering mode (evaluative/center/spot), resolution, and compression ratio, all with a very minimal number of button presses.  In addition there are buttons dedicated to EV (exposure compensation), focus (macro/distance/manual), ISO level, Face detection (sets the autofocus to any faces in the scene), flash, and timed shots / continuous shots. 

The program mode is common to most, if not all Canon cameras. What's really cool about the SX110, however, is that there is also a Manual position on the mode dial. Here, you can set the aperture size, the focus, and the exposure time. You use one button to cycle between each option, and then then you a dial you can rotate to quickly set each option's level. When setting the focus, a zoomed in view is shown in the center of the LCD so you can accurately judge focus. While in manual mode you can also set the flash power to 1 of 3 levels.

An interesting compromise between Manual and Program is the aperture and exposure time modes, where you control the respective named setting, and the camera selects the most intelligent value for the other setting (eg if you want to make sure that the exposure time is just 1/5 of a second, the camera will then choose the best aperture so that the image is properly exposed).

Once you've taken the picture, the SX110 automatically switches into review mode, which shows the last photo taken for 2 seconds (this can be set to anything between 0-8 seconds, or infinity). One option in this mode is to have the center of focus blown up to actual pixel sizes, so that you can assess from the LCD how blurry or noisy the image is. This is really handy. While in review mode you can also zoom in on the image to check out other parts of the photo, in addition to the center of focus).

Unlike other Canon cameras, there is now a dedicated button for switching into playback mode (ie you don't have to rotate the mode dial to switch to playback mode). This is really nice if you want to quickly check the quality of the last few photos you took. I much prefer this to how the other more compact powershots work.

One other nice feature of the interface is that you can set one of the buttons for custom use. The list of things that you can do with the custom button is a quite limited - I assign it to turn off the LCD, but there are other options which might interest you, such as one-touch custom white balance, and turning on a grid overlay for aligning your shots.  Note that the turn of LCD feature is a bit broken - if you so much as rotate the camera, the LCD comes back on. But you can use it to save battery life in the situation that you are just sitting, waiting for a good shot.

Performance (temporal)

The SX110IS turns on very quickly - the lens is extended in about a second, and you can go from power off to taking a picture in less than 3 seconds.  If you want to rapidly take pictures, you can switch the camera into multi-shot mode, where you can hold down the snapshot button and every 1.2 seconds a new photo will be taken - or if you tell the camera to only focus on the first picture, a new photo will be taken every 0.7 seconds. This is a good feature to use when trying to capture rapidly occurring events, or when trying to take a low-light pictures where you have the time to take 10 pictures and then sort thru them to find the one that is the clearest.

Focusing seems to be quite quick - only rarely does it take more than half a second to focus, and usually it focuses almost instantaneously (which is to say, too quick to notice). 

The review continues

So that's the basic specs, and how the  camera handles. What about image quality, etc? Click here for the rest of the sx110 review, and, eventually the conclusion. 

Saturday, November 1, 2008

Canon SX110 Review: a compact superzoom?

The Canon Powershot SX110 is a "compact" super-zoom (10x).  By compact I mean a good bit smaller than an SLR; but it's still bigger than most compact digital cameras.  If you have big pants pockets, it might fit, barely. But really, this camera is intended to be carried in one of those over the shoulder camera cases. 

The two pictures at right show the SX110 in comparison to the Canon SD850, which is a true pocket sized camera (though slightly more bulky than the average 'compact' camera, these days). On the off chance that you don't have personal experience with the SD850, I've also included an Altoids can, which is about the same size.

The SX110 measures 4.35 x 2.77 x 1.76 in., which, BTW, is bigger than the SD850 in every dimension. It's also a little bit heavier than the SD850, but not as much as you might expect. The upside of the camera's size, however, is that it's a very comfortable camera to hold, unlike the SD850, where there is little to get a good grip on. In fact, the right side of the SX110 has a beveled edge, which serves as an excellent grip.

When turned on the lens extends, nearly doubling the length of the camera. When the lens extends, the camera gets quite front-heavy, and will tip forward unless balanced on a perfectly flat surface. This may make it more difficult to take action shots of yourself using the 10 second self timer, unless you use a tripod. 

This post is part of a series that reviews the Canon SX110IS.

Wednesday, October 29, 2008

SX110IS Movie mode review

Like most digital cameras the Canon SX110 IS can record movies. Unfortunately, Canon chose the MJPEG format for saving the movies, which means that a 32 minute, 640x480 movie takes a whopping 4GB. Most modern cameras record in a more efficient format, like MPEG 2, or even MPEG 4. MJEPG looks great, mind you, but it takes much more space than any of the MPEG formats. Canon probably did this to save on MPEG licensing fees, but I'd rather pay a little for more compact files (or course, you can recompress your movies after downloading them, if you want).  

Movie resolutions include 640x480, 320x240, and 160x120, with smaller movies allowing much longer recording time. All movies are recorded at 30fps, a come-down from some earlier models, where you can choose 15,30, or even 60 fps. 

Once you start recording a movie the optical zoom and focus stay fixed. Luckily, the exposure does automatically adjust, so if you start filming indoors and then rotate the camera toward a window the camera will adjust. Though the optical zoom does not function, you can use the digital zoom to smoothly increase the magnification up to 4x. This doesn't look blocky, since the camera's native resolution is much higher than 640x480.

This post is part of a series that reviews the Canon SX110IS.

Thursday, October 23, 2008

Canon SX110IS review: 10x zoom lens performance in the real world

The Powershot SX110 has a 10x zoom lens, which is quite a step up from the compact cameras which typically only have 3-5x zoom. In this section, I'll show some real-world pictures demonstrating how much difference 10x zoom makes compared to a 4x zoom, and also show how usable 10x zoom is in moderate indoor light (answer: not so much).

At right is a wide-angle picture ("0x zoom") taken on a nice sunny day, at ISO 80. You can click on the image for a full-sized version. Note that the bus was a bit over-exposed so I had to adjust the brightness down a bit by pre-focusing on the sky, (IE holding the shutter button down halfway), and then reorienting on the bus. This is why the rest of the picture is a bit dark, but it was necessary in able to preserve detail on the bus, which I will zoom in on next.

This shot is taken at 10x zoom. Much less light is hitting the sensor because we have zoomed in all the way, but as you can see the image is still very clear and low-noise, with no blur, even though the camera is still in ISO 80. You can click on the image for a full sized version.

What would 13x zoom look like? I took advantage of the fact that the camera can do interpolation-free zooming if you take your picture at a lower megapixel setting; in this case zooming in past the optical limits of the lens is identical to cropping the image down to a smaller size. If you shoot in 4 megapixel mode this allows the 10x zoom to become a 13x zoom. As you can see in the picture at left, 13x doesn't make much of an improvement on 10x, but it's a nice feature if you tend to shoot in less than 9MP mode, as I do (9MP files are much bigger, and most of the time I'll never have a need for all those extra pixels). Note: the image at left has been resized down to 25% of its original size to save server space.

So far we've seen that the zoom functions great outdoors. What of indoors, where the light level is typically much, much lower? I took the next series of shots in the kitchen, with all the lights on. The room is pleasantly lit with 2 conventional 60 watt bulbs, and is far from dark, but isn't as bright as an indoor room with a large sunny window would be. At left we have the 0-zoom shot. It's already dark enough that I had to use ISO 400 to get a sharp shot. Detail is OK, but but Hi-ISO noise is certainly visible. On the upside, there's no blur.

At ISO 400 and full 10x zoom the result is a blurry mess. I tried taking several photos in case my hand just happened to be shaky, and couldn't do much better.

It wasn't until ISO 1600 (!) that the blurriness went away. Unfortunately, as you can see, most of the detail is now lost in CCD noise.

For comparison, I also took the same shot with my more compact Powershot SD850IS, also zoomed in to its max(4x), at ISO 200. This shot is interesting for 2 reasons. First, it shows the difference in scaling between a 10x zoom and a 4x zoom. It's definitely clear that a 10x lens takes you a good bit further in. It's also interesting because it shows how much more appropriate a 4x zoom is for indoor shots than a 10x zoom is. Now, you don't have to use the full range of a 10x zoom lens, and if I took this shot with the SX110 at 4x zoom, I'm sure it would look much better than at 10x zoom (unfortunately, the SX110 doesn't report zoom level, so I couldn't easily create such a shot for this webpage). The point is that all of the extra range that the SX110 offers is of little advantage if you'll be taking medium-light indoor shots like this one. On the other hand, zoom isn't really needed indoors. All of your subjects are close enough that you can just walk the 2-5 feet closer needed to get the proper framing. It's only outdoors where the long zoom becomes truly useful.

So, in conclusion, the zoom lens works great on this camera, in bright daylight. The difference in zoom between 4x and 10x is quite noticeable, and will allow you to get much closer to your outdoor subjects that you can't just walk up to.

Later in the day, and for moderately lit indoor shots, however, it's not really much more useful than the 4x zoom lens you would get on a good compact camera.

This post is part of a series that reviews the Canon SX110IS.

Monday, October 20, 2008

Canon SX110IS Review: image stabilization and HI ISO noise in low-light photography

In this section I consider how well the camera works in low-light situations. Given the SX110's image stabilization, the hope is to get relatively low-noise, low-blur shots without having to use a tripod. In general it does well on the low-blur criteria, but not so well on noise.

At right you can see a hand-held shot with image stabilization on, at ISO 80, with a 1/1.3 second exposure (~0.7s). I have a pretty steady hand, but even I was surprised to see how little blur there was in the photo. The SX110's image stabilization works amazingly well. Shift-click on the photo to view it full-sized, however, and you will see that there is definitely both blur (unsurprising for a ~0.7s exposure!) and CCD noise (a bit disappointing, but the light level is quite low).

This photo was taken at ISO 200, with a 1/3.3s exposure. Already, things are much better. The unzoomed photo at right actually looks quite sharp, but if you click on it for the full sized version you will see that there still is some blur. CCD noise is worse, but not much.

Next, I turned off image stabilization, and used the same ISO/exposure (200,1/3.3s). As you can see, the result is quite blurry, perhaps even without viewing the image full size. Note, just how much blur you would get in this situation would vary by user and chance, since it all depends on how firm and steady your hand is. Any way you cut it, however, you can see that image stabilization is buying you a lot.

With image stabilization back on, I raised the ISO to 400, with a 1/6s exposure. The result seems to be slightly more resolvable detail, if you view the image full screen. For instance, try to read the text on the pill bottle. The amount of noise, unfortunately, also goes up, though this is only really noticeable if you zoom all the way into 1:1 pixels, or if you have a really, really huge monitor (the image is 9 megapixels, which is 3456 x 2592).

Next up is ISO 800, with 1/13s exposure. Now the CCD nosie is significantly higher, and the level of detail doesn't seem to have improved at all. This ISO level might be useful if you have shakey hands, or a faster-moving subject than my desktop still-life pictured here. Otherwise, I would stick to ISO 400 or below.

In conclusion, the image stabilization works great. You can get good low-light shots even at ISO 200. Unfortunately, the CCD noise is pretty high - higher than I would have guessed given the size of the lens (which allows more light to enter the camera, which should, in theory, result in less noise). This is not as big a deal, however, if you don't need all 9MP of resolution. Viewing the photos on my 1280x1024 monitor, CCD noise only became objectionable at ISO 800. While monitors will continue to grow in resolution, it's going to be quite a while before even a few of us have 3456 x 2592 displays where you could actually display each pixel of a 9MP image. The other important point to keep in mind is that the actual ISO is pretty unimportant in the end: what you care about is whether you can get good low-blur, high-detail images without using the flash. If ISO 200 is good enough for that, who cares if some noise creeps into ISO 400.

This post is part of a series that reviews the Canon SX110IS.

Canon SX110 Review: lens distortion - lab tests and real world images

The SX110 has a 10x zoom lens. With such a wide range you might be concerned that image quality might be compromised either at the wide or telephoto setting. On the whole, however, image quality is good throughout the whole zoom range.

At right is the camera at its widest zoom. Some barrel distortion is visible (IE, curved lines which should be straight), but it's not bad. Note, however, that most cameras have this to some extent. On the positive side, the corners of the image are just as sharp as the center. Many cameras, particular more compact models, have blurry corners. Many Canon SD cameras exhibit this problem fairly clearly, such as last year's SD850IS. It's nice to see that the SX110 does not.

Next is the lens at the other extreme of the zoom range, in full telephoto. Here, there is no indication of the barrel distortion seen at the wide angle setting. Again, there is also no corner blur. Thus, the lab tests show that the lens performs quite well.  What of real-world shots, however? In particular, does the wide-angle barrel distortion show up in photos of the real world? See the next few pictures. 

In this picture, which is designed to highlight the problem, it is possible to see distortion. Even so, it's not nearly as obvious as in the lab test. Given that you are unlikey to take a picture like this unless you are trying to show off the flaws in the optics, it's not too bad.

This picture is perhaps more representative of the real-world images which would show off this problem. The support columns clearly bend out toward the middle, whereas in real life they are as straight as your typical 2x4. Whether or not you find this objectionable is really a question of taste, but I personally don't notice it unless I'm looking pretty carefully.

This post is part of a series that reviews the Canon SX110IS.

Sunday, October 19, 2008

Canon S110X review: real-world test photos

In this series of pictures I show how well the Canon S110X Superzoom camera performs in real-world situations. 

This picture shows a close-up of a Lego robot. The light level was moderate, and I kept the ISO low (200), and took several pictures, saving the least blurry. If you click on the picture for a full sized image, you'll see that there's still some CCD noise in the image, but very little.

This picture was taken in outside a dramatically lit storefront, at night. Even though the ISO was inly 200, it came out with very little blur, or noise.

This picture was taken on an somewhat overcast day. The color is pretty accurate.

The camera did a good job of capturing this shot, impressive given the wide dynamic range. I had to tweak the exposure a little, using the manual mode of the camera, to get it to come out looking this good.

This sunset shot looks nice enough on my computer screen, but it doesn't really capture the colors as they were in person. This is a problem for most cameras, to be fair. Note that this was taken from a moving car, but is relatively blur-free.

This portrait shot shows good color balance and a nice depth of field effect (The face is in focus while the background is not. To get this effect I stood relatively far from my subject and then used the 10x lens to zoom in on the face).

The colors came out really nicely in this foggy day photo.

Another sunny day shot, showing that in full automatic mode the camera does a reasonable job of exposure, but still somewhat clipped.

This photo was taken in full manual mode (the focus was set automatically, but the exposure and F stop were set by hand). This is great fun to play around with, but time consuming, and not without risk. This picture was taken on a sunny day, but manages to look overcast. To be fair, it was one of the first pictures I took using full manual mode. The moral here is that full manual mode is a nice feature, but it will take some time to get good with it.

I took this picture late in the evening at a local mall. What with people moving around, it was very hard to get a low-blur image, without cranking the ISO way up. Instead I used the burst mode on the camera and just took 10 pictures in quick succession. After downloading the photos from the camera I could quickly pick through the set and find the clearest, most pleasing photo, which is this one. Many of the others were also reasonably sharp, but some where quite blurry. Image stabilization can make your pictures sharper, but it can't make moving people stand still!

This post is part of a series that reviews the Canon SX110IS.

Thursday, September 25, 2008

A1000IS : part of the new Canon powershot lineup

Canon has 3 fairly compelling cameras out right now in the compact/ultracompact form factor.  First up: the A1000IS ($200 at amazon). 

The A1000IS is the most compact AA-using camera
 Canon has ever made, at 3.8 x 2.5 x 1.2. For comparison, the proprietary battery using SD850 of last year is 3.6 x 2.2 x 1 in.  The extra thickness is due to the bulge on the side of the camera where the batteries go. It's quite pocket friendly, and the bulge makes it much nicer to hold while taking pictures than the SD850 was. The specs of the A1000IS are also quite nice: 4x
 optical zoom, optical image stabilization, 2.5in LCD (115k pixels), optical viewfinder, and more megapixels than you'll ever need (10!). With disposable AA batteries, Cannon claims you can take 220 pictures per charge, with the LCD on (no specs published with the LCD off, unfortunately). You can also get rechargeable NIMH batteries, which will net you 450 shots per charge. It's really nice to have the choice. I'd go for the NIMH batteries, with the piece of mind that if I ever need backup batteries I can always buy some standard AAs.

My hands-on experience with the camera is quite limited. As I said before, it's quite comfortable to hold, and rests in your hands easily without having to grip tightly. All the buttons are easy to push, and are reasonably tactile (though not as much as the supremely satisfying buttons on the SD1100) . The zoom is also easy to operate. Disappointingly, however, the mode dial is very, very tight. There's no way you could turn it with one finger, and even using two fingers it's some work.  While I appreciate the fact that it won't get turned by mistake, I think they went overboard. 

I haven't played with it enough to judge the optics quality, but I expect it's up to the high Canon standard. 

At $200, it's quite a camera. There are, however, several other cameras from Canon at that price range worth considering. The SD1100IS is significantly smaller, but has a smaller zoom, and goes for $171.  The older SD850IS is a bit smaller, but has the same zoom, for $220. And, if you are on a really tight budget, the A590IS is a bit larger, has the same zoom, and is only $125

Tuesday, August 26, 2008

Inside the SD110 - part 3: underside of the mainboard

(Jump to the previous post in series.)

In this shot you can see the other side of the mainboard. Again there are several ICs, the most interesting being the DIGIC IC (version II). This is the main chip that Canon produces, and gives the camera it's personality. This chip incudes several functional parts, according to wikipedia; a general purpose CPU (a 32 bit RISC cpu made by ARM), a video controller and a still picture controller. The code running on this chip provides all of the interface that you see when you use the camera, as well as all the video and image processing when you take a photo or record a movie. Interestily, the DIGIC II was used by a huge range of cannon cameras from the high-end EOS20 to the lowly SD110, and even fairly recent models such as the SD700. All modern Canon cameras in production, however, use the newer DIGIC III.

Saturday, May 17, 2008

Canon PowerShot SD890 IS and SD850IS compared

Canon has released a lot of new cameras since my last post. Today I'll discuss the SD890, which appears to be an update to the SD850. Like it's predecessor, it has a 2.5" LCD, an optical viewfinder, and image stabilization. The Sd890's major improvement over the older camera is that it features a 5x optical zoom. That's the highest zoom I've heard of in a compact camera. Unfortunately, Canon did have to make the camera slightly larger in every dimension, at 3.8 x 2.3 x 1.1 in (vs 3.6 x 2.2 x 1 in. for the sd850). The SD850 is already about as big as I'm willing to carry around in a pocket, so for my money I'd go for the SD850 instead (which is only $240, vs $350 for the SD890). An interesting side note is that the SD850's price hasn't dropped much from when I bought it, 5 months ago, at $250.

The only other advantage to the SD890 is the shots (CPIA) per charge is better: 320 (vs 240). With the LCD off it goes up to 800!

So far I've only found one review. They found the ergonomics surprisingly poor: not easy to hold, and difficult to navigate between pictures. I hope to put my hands on on one soon, and post my own review. They also found that at the widest setting, the lens was rather distorted, and produced photos with blurry corners (see ttp:// Given the higher zoom of this lens, it's not surprising, and likely it's worse than for the SD850, though there are not enough sample pics out there to be able to judge this yet. The only real positive I found in this review is that the noise level at ISO 800 is notably better than on the SD850. That's at least something.

Oh, and did I mention that it's a 10 megapixel camera (up from 8MP on the SD850)? But who cares, these days, about the mega pixel rating?

Sunday, May 4, 2008

Innovating at the color filter level

As I've discussed before, the way your camera produces color images is by placing a color filter over what is essentially a monochrome sensor. The redness of a particular pixel, for instance, depends on how much light passed through the red filter above the nearest CCD element to that pixel. The big disadvantage is that the filter must discard a lot of the light entering the lens. I never thought about it before, but apparently there exist many different possible color filter layouts, with different advantages and disadvantages.
has some really nice examples of the possible trade-offs.

Hack your PowerShot camera's firmware

I just found this amazing website where several camera enthusiasts have figured out how to hack the firmware for the Canon PowerShot cameras (most cameras from the last few years are supported, and many recent models are supported). The hacks range from the mildly useful, such as live histograms, to the amazing, such as enabling 1/10,000th of a second exposures. Also particularly notable is the added ability to save pictures in RAW mode.

In particular, check out the high-speed photography pictures.

I'm going to try this out my SD850 soon. In the mean time, I encourage PowerShot owners to give it try, as the firmware hacks are non-destructive; you have to enable them each time you turn on the camera, so there's no risk to giving them a try.

Sunday, April 27, 2008

Inside the SD110 - 2nd step: the mainboard

(Jump to previous post in series.)

Just like in your computer, the SD110 has a mainboard where most of the logic chips and main CPU are placed. It's quite easy to get to; just pop the outside case off and there it is, under a layer of copper shielding, shown folded back to the left side of the picture. At this stage you can see several interesting features of the camera. First, many of the components are made by other companies, such as the two ICs in view, one from NEC and one from SAMSUNG.
Second, note how many ribbon cables there are on this card. While this may be the mainboard, there are a huge number of axillary boards, which you will see in later pictures. These boards are all attached with ribbon cables, which turn out to be relatively easy to remove and re-insert. Finally, note the ribbon cable on the lower-right, with the many silver dots. While it's not terribly clear, I suspect this is actually a testing port. The idea is that you could slip the whole thing into a connector and interface directly with the camera while it is apart. While this might be for repairmen to diagnose a problem with a camera that has been sent back for repair, another possible use is to test camera components while the whole thing is being assembled.

(jump to the next post in this series)

Monday, March 24, 2008

Download photos from your Canon Powershot under Win2k3

Out of the box, the Canon Powershot software is not not compatible with Windows 2003 Server. But with some tweaking, you can make it work.

First, you need to install SSDP and UPnP services for Win2k3.

Next, make sure that the old Canon software is uninstalled.

Then, set the startup.exe install program on your Canon driver CD to load in WindowsXP compatibility mode. Run setup, and install ZoomBrowser ex, and photo stitch. I've found that version 5.8 does not run well under Win2k3, but that 6.x works fine, so at this point you may need to download and install an updater from Canon's website.

After rebooting, plug your camera in. The Canon software may load automatically. I found that I had to first open the Windows Control Panel for Cameras and Scanners and set Camera Window as the default action when my camera was plugged in.

After doing this the Canon software would load when I connected the camera, but clicking on the download images button did not work. A final step that I had to complete was to open the E:\Program Files\Canon\CameraWindow\CameraWindowDVC6 folder, and set all the EXE files to WindowsXP compatibility mode. I'm not sure this is necessary, since I discovered that some of the files had been set into Win2k compatibility mode from when I had been trying other methods to get the CameraWindow software to work. Win2k mode definitely doesn't work.

After those steps the Canon software works flawlessly. I can download pictures just fine, and all the Canon photo tools work just fine. In the MS event viewer tool, I do see the following, rather ugly message a lot, but I've never seen any actual malfunction:

Generate Activation Context failed for c:\Program Files\Canon\ZoomBrowser EX\Program\MFC80U.DLL. Reference error message: The referenced assembly is not installed on your system.

Thursday, March 20, 2008

Canon SD850IS and Win2k3 do not work together

I have recently started using Windows 2003 Server, to avoid having to upgrade to Vista. After installing the drivers and applications for my Canon camera, I get the following error on each bootup:

The Canon Camera Access Library 8 service depends on the following nonexistent service: SSDPSRV

Using regedit I searched for SSDPSRV, and removed this dependency (see thread that suggested this) so that the Camera Access Library would load, but apparently it really does depend on SSDPSRV, or there is another incompatibility with Win2k3. Turning on the camera does load the Windows Image acquisition manager (after I enabled that service), but does not load the Canon tool for downloading images.

UPDATE: there is a workaround.

Sunday, March 16, 2008

IrfanView 4.1 released

IrfanView is my favorite image viewer. Here's some of the highlights of this version:

* Lossless JPG Crop added (Menu: Options or Thumbnails (batch mode))
Support for FLV format (flash video/image).

Get it here:

Don't forget to download the plugins as well.

Sunday, February 17, 2008

Inside the SD110 - first steps

(2nd post in this series: jump to previous post)

After my SD110 died I decided to take it apart. Here's the first two views. Canon was nice enough to use regular screws (Philips) so it wasn't too hard to get inside. Getting the metal shell off did involve some prying, even after the screws were gone, but nothing heroic.

Once inside I was quite impressed by how tightly everything is packed in. There's no wasted space, not that you would really expect otherwise from an ultra compact camera.

What was unexpected was just how dusty it was on the inside. Even so, all the mechanical parts continued to work.

Canon uses lots of ribbon cables to attach all the PC boards together. I think that's part of how they manage to have such a high density layout. After seeing how many ribbons were plugged in, I had some hope that maybe there was just a dirty connector, and that if I were to plug and unplug everything the CCD might work again, but this hope was unfounded. I managed to reset almost all the connectors, without making any improvement in the CCD image.

(See next post in this series.)

Wednesday, February 6, 2008

SD850 - customizable button

The SD850IS does have one nice customization option. There's a button for making your photos print when the camera is connected to a printer, but it is (or was) useless while taking photos.

Canon now lets you assign a function of your choice to the button. The function I was most excited about was turning on or off the LCD, but it turns out to work very poorly for that. You see, whenever you do something that would change one of the status lights on the LCD, the camera helpfully turns the LCD on again. One of the status lights on the LCD tells you which way the camera is oriented. So, if you turn of the LCD with this button, all you need to do is rotate the camera a little, and back on it comes. Also, the button doesn't work in all situations - such as during the 2-N second review of each snapshot you take.

There are other options you can assign the button - such as, start taking a movie, turn on a grid for composing your shot, open up a menu to let you set the EV, or change the white balance. None of which turn out to be that helpful, however.

In a related note, however, turning off the LCD is rather quick on this camera. There is a "DISP" button, which cycles between showing the current settings on top of the current image / just a bare image / LCD off. Which is to say like every other camera's "DISP" button. Except that a quick double click of the button will turn off the LCD (you don't have to wait at all between clicks), which makes it almost as good as having a dedicated button to turn off the LCD.

customization - when and how?

I wish consumer electronics were designed to let you customize how they worked a little bit better. A great example is the "High ISO" option that most cameras have these days. It's nice to have a mode where the camera automatically boosts the ISO so that your photos are not too blurry. But that boost comes at cost, which is grainy and desaturated photos. I wish that my camera had the option where I could set what the maximum ISO boost would be. For instance, ISO 800 looks like crap on my SD850IS, while ISO 400 isn't too bad. But the high ISO mode is happy to go all the way to 800, even when I personally think 400 would do. Let me decide how much noise I'm willing to have in my pictures! Yes, I could set the ISO manually, but it's a pain to do this for each and every shot.

Some photo sites - posts tips and tricks for digital photography, about once a week.

Monday, January 21, 2008

Two generations of PowerShot camers: the SD110 and the SD850IS

I recently purchased a Canon SD85oIS. It's almost exactly the same size as my much older SD110 (purchased in March of 2005). The SD110 was the second Powershot in the SD line, but it wasn't that new a design - Several of the S series of cameras had almost identical form factors, except for using a Compact Flash card instead of an SD card.

Side by side with the SD850IS you can see they share some common linage, but a lot has changed.

The 850 is much more curved. In theory this should make it rest more comfortably in your pocket, and indeed I feel this is true, though it's subtle. A really big change is the size of the LCD, which covers almost the entire backside of the 850. It's a very nice screen to frame and review photos, but it does mean that the camera doesn't have a good surface to hold onto any more. The SD110 had lots of open space for you to rest your thumb and other fingers, making it easy to hold securely. I'm still working on finding an effortless-but-secure grip on the SD850. I fear I may never find it.

The mode dial is recessed on the SD850, which again probably makes it easier on your pocket. But the SD110's mode dial was easier to flick into position. The zoom level on the SD110 was also a bit bigger than on the SD850. In this one case, it seems that the reduction in protrusions has no downside - both the SD850 and the SD110 are equally easy to zoom.

Interestingly, the UI for the camera is almost unchanged from the SD110 to the SD850. There are a few new options, and most notably, it's much easier to change the ISO setting, but on the whole the same menu structures and button names are used accross the whole SD line. I think this reflects the high quality of the SD110's menus - Canon figured out a good system way back then (or likely, earlier) and has stuck to it.

Sunday, January 13, 2008

Death of a CCD: RIP SD110

About a month ago I turned on my Canon SD110 and could see that something was very wrong. This took me by surprise, as I hadn't dropped it, or even taken it anywhere since the last time I took pictures with it, in my living room. I guess it just died of old age after 3 years (and 7000 pictures). The interesting part is that it was clearly the CCD that was failing. In some ways it actually looked pretty neat.

One way you can tell it's the CCD is the streaks in the images. The way data is read from a CCD is by copying off all the pixels along one edge of the CCD, and then shifting all the pixels in the image one pixel toward that edge. The line read off "falls off" the edge, and now the next line of the image can be read in. Part of the trick with CCDs is reading off each line in this way, without causing artifacts by the repeated pixel shifting. Clearly, something is going wrong with that process in my camera.

Click on the pictures to get full sized images.

Thursday, January 3, 2008

Windows 2k support for Canon SD850IS Powershot

With my new SD850IS camera I had a bit of difficulty getting my Windows 2000 computer to recognize the camera. It does work however - the problem was that the installation routine was unclear. One of the options was to install TWAIN drivers for the camera. TWAIN is a protocol most known for allowing programs, such as PhotoShop, to acquire images from a scanner. By default I assumed that Canon was giving you the option of doing the same, except that the source would be the camera. But since I have no desire to directly download images into PhotoShop I skipped installing it. Well, as it turns out you need the TWAIN drivers to download pictures from the camera at all, even if you are using ImageBrowserEX.

Come on Canon! It would be so easy to make this clearer in the installation program. Why should I have to read the manual just to install the right driver?

As it turns out, the new image downloading software that came with ImageBrowserEx 5.8 has a nice feature that the older versions did not have. First, you get a preview of your photos as they are downloaded from the camera. Second, you can tell the program to delete photos from your camera after downloading, automatically. This is a great idea - after downloading pictures there's no reason to leave them on the camera. With this change, it's finally the case that Canon's photo download routine is as useable as the default USB mass storage method of accessing your photos that most other cameras use. This is especialy true if you like the feature that Canon offers of splitting your photos into sepeate folders, one for each day you took pictures.

I still wish they also offered USB mass storage support, however, so that I could grab my photos off the camera without having to install drivers on machines that don't support the DPIC protocal that Canon uses (altho to be fair WinXP and OSX both support DPIC, so this is a dimishing problem).